DIAMOND BLADE DO'S & DONT'S

DO'S

♦Follow manufacturer's blade recommendation for materials being cut. Check for suitablility of cutting dry. ♦Inspect diamond blade for damage prior to mounting on saw. Check arbor shaft and flanges for damage or uneven wear. ♦Be sure blade is mounted on correct diameter shaft with arrow in the proper direction of rotation and blade shaft nut is securely tightened with a wrench. ♦Inspect blade periodically during use for fatigue, cracks, and segment damage. ♦When using water, check for continuous flow to both sides of blade. ♦Follow maufacturers recommended pulley sizes and operating speeds for specific diameter blades. ♦ALWAYS WEAR PROPER SAFTY EQUIPMENT!

DONT'S

♦Never operate equipment without proper guards and safety equipment installed. ♦Do not exceed maximum operating speed established by the blade diameter. ♦Do not dry cut with a blade recommended for only wet cutting. ♦Do not force blade into the material being cut. ♦Do not make long continuous cuts with a dry blade. Stop frequently to allow the blade to cool ♦Do not cut or grind with the side of the blade, or try to cut a curve or radius. ♦Do not operate saw with blade diameter larger than machine's intended capacity.